The Stinger PolyBerm is a hybrid, heavy-duty secondary containment system that takes advantage of the strength of molded plastic and blends it with the portability of industrial fabrics.
- No excavation or anchoring required
- Lightweight, modular design can install with as few as two people
- Components are stacked and nested for shipping and storage
- Interlocking joints
- Designed for use with ATPD 2262 liners
- Flexible use in cold, hot, or wet environments
- Removable sump liner for easy decontamination
- No special tools required
- Cabling included for catastrophic failure scenarios
- Can be used as a permanent structure, or easily disassembled and transported
- Specifically designed and tested for military fuel/water bladders
- Custom sizes available
Includes:
- EnDuraLine reinforced polyethylene liner
| Part Number | For Use With | Containment Dimensions LxWxH ft. (m.) |
Spill Capacity* gal. (L.) |
| 3'H Walls | |||
| 45-21213-PB-L | 10K Bladder | 21x21x3 (6.4x6.4x0.9) | 9,896 (37,460) |
| 45-37373-PB-L | 20K Bladder | 37x37x3 (11.3x11.3x0.9) | 30,722 (116,295) |
| 45-37813-PB-L | 50K Bladder | 37x81x3 (11.3x24.7x0.9) | 67,257 (254,565) |
| 4'H Walls | |||
| 45-21214-PB-L | 10K Bladder | 21x21x4 (6.4x6.4x1.2) | 13,195 (49,948) |
| 45-37374-PB-L | 20K Bladder | 37x37x4 (11.3x11.3x1.2) | 40,963 (155,061) |
| 45-37814-PB-L | 50K Bladder | 37x81x4 (11.3x24.7x1.2) | 89,676 (339,460) |
*The berm spill capacity is based on dimensions, low flow rate, a level surface and no displaced volume.
